txt xls Info: alphabetical system ordering by names

  1. Abidin A.Z., Kozera R., Hohn M., Endler I., Knaut M., Boczkowska A., Czulak A., Malczyk P., Sobczak N., Michaelis A., Preparation and characterization of CVD-TiN-coated carbon fibers for applications in metal matrix composites, Thin Solid Films, (2015), 589(August 2015), 479-486, doi: 10.1016/j.tsf.2015.06.022, ISSN: 0040-6090.
  2. Adamczyk Z., Nattich-Rak M., Sadowska M., Michna A., Szczepaniak-Lalewicz K., Mechanism of nanoparticle and bioparticle deposition – Kinetic aspects, Colloids and Surfaces A, Physicochemical and Engineering Aspects (2013) (439), 3–22.
  3. Amore S., Giuranno D., Novakovic R., Ricci E., Nowak R., Sobczak N., Thermodynamic and Surface Properties of Liquid Ge–Si Alloys, CALPHAD, Computer Coupling of Phase Diagrams and Thermochemistry (2014), 44, March 2014, 95–101.
  4. Amore S., Giuranno D., Novakovic R., Ricci E., Nowak R., Sobczak N., Thermodynamic and Surface Properties of Liquid Ge–Si Alloys, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, online 3 August, (2013), http://dx.doi.org/10.1016/j.calphad.2013.07.014, ISSN 0364-5916.
  5. Asthana R., Nowak R., Purgert R., Sobczak N., Wetting in High-Temperature Materials Processing: The Case of Ni/MgO and NiW10/MgO, Scripta Materialia (2010), 62(12), 949–954, ISSN 1359-6462.
  6. Asthana R., Sobczak N., Singh M., Wetting Behavior and Interfacial Microstructure of Palladium- and Silver-Based Braze Alloys with C-C and SiC-SiC Composites, Journal of Materials Science (2010), 45(16), 4276–4290, ISSN 0022-2461.
  7. Babul T., Baranowski M., Sobczak N., Homa M., Leśniewski W., Thermophysical properties of Cu-matrix composites manufactured using Cu powder coated with graphen, Journal of Materials Engineering and Performance, (2016), 25(8), 3146-3151, ISSN 1059-9495
  8. Bacior M., Sobczak N., Siewiorek A., Kudyba A., Homa M., Nowak R., Dziula M., Masłoń S. , Effects of PCB Substrate Surface Finish, Flux, and Phosphorus Content on Ionic contamination, Journal of Materials Engineering and Performance, (2014), DOI: 10.1007/s11665-014-1357-1, ISSN 1059-9495.
  9. Bacior M., Sobczak N., Siewiorek A., Kudyba A., Homa M., Nowak R., Dziula M., Masłoń S. , Effects of PCB Substrate Surface Finish, Flux, and Phosphorus Content on Ionic contamination, Journal of Materials Engineering and Performance, (2015), 24(2), 754-758, ISSN 1059-9495.
  10. Białobrzeski A., Saja K., Corrosion Behaviour of Binary Ultralight Mg-Li Alloys for Plastic Forming. International Virtual Journal for Science, Technics and Innovations for the Industry, MACHINES, TECHNOLOGIES, MATERIALS (2012), 6(11), 37–40, ISSN 1313-0226.
  11. Boroń Ł., Tchórz A., Application of EDS Microanalysis in the Identification of Inhomogeneities in Surface Protective Layers on Ductile Cast Iron Parts, Journal IOP Conf. Series: Materials Science and Engineering (2010), 7(1), 1–6, ISSN 1757-899X.
  12. Chojecki A., Sobczak N., Mocek J., Nowak R., Siewiorek A., Gas Evolution from Heated Bentonite Bonded Moulding Sand, International Journal of Cast Metals Research (2013), 26(1), 58–63, doi: 10.1179/1743133612Y.0000000018, ISSN 1364-0461.
  13. Cygan R., Sobczak N., Suchy J.S., Interaction: Ceramic Mould-Metal in Nickel Superalloy Castings, Giessereiforschung. International Foundry Research (2009), 61(3), 16–21, ISSN 0046-5933.
  14. Czekaj E., Karwiński A., Pączek Z., Pysz S., Badania możliwości zastosowania wymuszonego kierunkowego krzepnięcia odlewów wykonywanych w formach piaskowych, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 394–400, ISSN 2222-8618.
  15. David J., Svec P., Garzinova R., Kluska-Nawarecka S., Wilk-Kołodziejczyk D., Regulski K., Heuristic modeling of casting processes under the conditions uncertainty, Archives of Civil and Mechanical Engineering, (2016), 16(2), 179-185, ISSN 1644-9665
  16. Du H.L., Dudziak T., Influence of oxygen partial pressure variation on oxidation resistance of Ti-46.7Al-1.9W-0.5Si at 750, 850 and 950°C, Journal of Materials Engineering and Performance, (2018), 1-8, ISSN 1059-9495.
  17. Dudek P., Fajkiel A., Reguła T., The research on the ablation casting technology for aluminium alloys, Solid State Phenomena, (2015), 223, 70-77, doi:10.4028/www.scientific.net/SSP.223.70, ISSN 1662-9779.
  18. Dudziak T., Fireside corrosion degradation of 15Mo3, T22, T23 & T91 in simulated coal-biomass co-fired environment, MATERIALS AND CORROSION - WERKSTOFFE UND KORROSION, (2014), DOI: 10.1002/maco.201407886.
  19. Dudziak T., Boron L., Homa M., Nowak R., Horton N., Sheppard R., Purgert R.M., Siewiorek A., Sobczak N., Sobczak J.J., The influence of fabrication process on the initial stages of steam oxidation performed on Haynes 282 alloy at 760°C, Journal of Materials Engineering and Performance, (2016), DOI: 10.1007/s11665-016-2417-5. ISSN 1059-9495.
  20. Dudziak T., Boron L., Homa M., Nowak R., Horton N., Sheppard R., Purgert R.M., Siewiorek A., Sobczak N., Sobczak J.J., The influence of fabrication process on the initial stages of steam oxidation performed on Haynes 282 alloy at 760°C, Journal of Materials Engineering and Performance, (2017), 26(1), 239-249, ISSN 1059-9495, DOI: 10.1007/s11665-016-2417-5.
  21. Dudziak T., Boroń Ł., Deodeshmukh V., Sobczak J.J., Sobczak N., Witkowska M., Ratuszek W., Chruściel K., Steam oxidation behaviour of advanced steels and Ni-based alloys at 800 deg. C, Journal of Materials Engineering and Performance, (2017), 26(3), 1044-1056, ISSN 1059-9495
  22. Dudziak T., Boroń Ł., Gupta A., Saraf S., Skierski P., Seal S., Sobczak N., Purgert R., Steam oxidation resistance and performance of newly developed coatings for Haynes 282 Ni based alloy, Corrosion Science, (2018), 138(1 July 2018), 326-339, ISSN 0010-938X.
  23. Dudziak T., Datta P.K., Du H.L., Long exposure test in air, conducted on super-lattice coatings at 850 oC for 4000 hours, Anti-Corrosion Methods and Materials, (2014), DOI: 10.1108/ACMM-03-2014-1366, ISSN 0003-5599.
  24. Dudziak T., Deodeshmukh V., Backert L., Sobczak N., Witkowska M., Ratuszek W., Chruściel K., Zieliński A., Sobczak J., Bruzda G., Phase investigations under steam oxidation process at 800°C for 1000 h of advanced steels and Ni-based alloys, Oxidation of Metals, (2016), ISSN 0030-770X, doi:10.1007/s11085-016-9662-8.
  25. Dudziak T., Deodeshmukh V., Backert L., Sobczak N., Witkowska M., Ratuszek W., Chruściel K., Zieliński A., Sobczak J., Bruzda G., Phase investigations under steam oxidation process at 800 °C for 1000 h of advanced steels and Ni-based alloys, Oxidation of Metals, (2017), 87(1-2), 139-158, ISSN 0030-770X, doi:10.1007/s11085-016-9662-8.
  26. Dudziak T., Du H., Datta P., Long exposure test in air, conducted on super-lattice coatings at 850C for 4000 hours, Anti-Corrosion Methods and Materials, (2015), 62(6), ISSN 0003-5599.
  27. Dudziak T., Du H.L., Datta P.K., Ehiasarian A.P., Reinhard C., Hovsepian P.Eh., Enhanced sulphidation/oxidation resistance of Ti–45Al–8Nb alloy by multilayered coatings at 850°C for up to 675 h, Corrosion Engineering, Science and Technology, (2014), 49(7), 590-602, http://dx.doi.org/10.1179/1743278213Y.0000000142, ISSN 1478-422X.
  28. Dudziak T., Du H.L., Datta P.K., Hovsepian P.Eh., Air oxidation behaviour of standard PVD and novel HIPIMS coatings at 750°C for 1000 h, Corrosion Engineering, Science and Technology (2014), http://dx.doi.org/10.1179/1743278214Y.0000000202, e-ISSN: 1743-2782.
  29. Dudziak T., Du H.L., Datta P.K., Hovsepian P.Eh., Air oxidation behaviour of standard PVD and novel HIPIMS coatings at 750°C for 1000 h, Corrosion Engineering, Science and Technology, (2015), 50(2), 118-127, ISSN 1478-422X.
  30. Dudziak T., Gajewski P., Śnieżyński B., Deodeshmukh V., Witkowska M., Ratuszek W., Chruściel K. , Neural network modelling studies of steam oxidised kinetic behaviour of advanced steels and Ni-based alloys at 800°C for 3000 h, Corrosion Science, (2018), 133(1 April 2018), 94-111, ISSN 0010-938X.
  31. Dudziak T., Grobauer S., Simms J.N., Krupp U., Lukaszewicz M., Oakey J.E., Metal loss of steam oxidised alloys after exposures at 675 and 725°C for 500 hours, High Temperature Materials and Processes, (2014), DOI 10.1515/htmp-2014-0164.
  32. Dudziak T., Grobauer S., Simms N., Krupp U., Łukaszewicz M., Metal loss of steam-oxidized alloys after exposures at 675C and 725C for 500 hours, High Temperature Materials and Processes, (2015), 34(8), 783-798, ISSN 0334-6455, doi:10.1515/htmp-2014-0164.
  33. Dudziak T., Hussain T., Orlicka D., Pokrywa A., Simms N.J., Fireside corrosion degradation of 15Mo3, T22, T23 & T91 in simulated coal-biomass co-fired environment, Materials and Corrosion, (2015), 66(9), 839-850, ISSN 1521-4176
  34. Dudziak T., Hussain T., Simms N.J., High-temperature performance of ferritic steels in fireside corrosion regimes: Temperature and deposits, Journal of Materials Engineering and Performance, (2016), ISSN 1059-9495, DOI: 10.1007/s1166501624237
  35. Dudziak T., Hussain T., Simms N.J., High-temperature performance of ferritic steels in fireside corrosion regimes: Temperature and deposits,, Journal of Materials Engineering and Performance, (2017), 26(1), 84-93, ISSN 1059-9495, DOI: 10.1007/s11665-016-2423-7.
  36. Dudziak T., Hussain T., Simms N.J., Syed A.U., Oakey J.E., Fireside Corrosion Degradation of Ferritic Alloys at 600°C in Oxy-fired Conditions, Corrosion Science (2013), doi:http://dx.doi.org/10.1016/j.corsci.2013.11.005.
  37. Dudziak T., Hussain T., Simms N.J., Syed A.U., Oakey J.E., Fireside Corrosion Degradation of Ferritic Alloys at 600°C in Oxy-fired Conditions, Corrosion Science (2014), 79, 184-191, ISSN 0010-938X
  38. Dudziak T., Jura K., Polkowska A., Deodeshmukh V., Warmuzek M., Witkowska M., Ratuszek W., Chruściel K., Steam oxidation resistance of advanced steels and Ni-baded alloys at 700°C for 1000 h, Oxidation of Metals, (2017), ISSN 1573-4889, doi:10.1007/s11085-017-9818-1. (35 p., B)
  39. Dudziak T., Jura K., Rutkowska J., Chlorine corrosion degredation of low alloyed ferritic steels in temperature range 450-550 °C, Oxidation of Metals, (2016), 85(5-6), 647-664, ISSN 0030-770X
  40. Dudziak T., Medvedovski E., Homa M., Multilayered coatings for high-temperature steam oxidation: TGA studies up to 1000°C, Journal of Materials Engineering and Performance, (2018), 27(8) : 4317-4335, ISSN 1059-9495.
  41. Dudziak T., Olbrycht A., Polkowska A., Boroń Ł., Skierski P., Wypych A., Ambroziak A., Krezel A., High temperature coatings from post processing Fe-based chips and Ni-based alloys as a solution for critical raw materials, IOP Conference Series: Materials Science and Engineering, (2018), 329(1), article number 012010, ISSN 17578981.
  42. Dudziak T., Łukaszewicz M., Simms N., Nicholls J., Analysis of High Temperature Steam Oxidation of Superheater Steels Used in Coal Fired Boilers, Oxidation of Metals, (2015), October 2015, 1-17, ISSN 0030-770X.
  43. Dudziak T., Łukaszewicz M., Simms N., Nicholls J., Analysis of high temperature steam oxidation of superheater steels used in coal fired boilers, Oxidation of Metals, (2016), 85(1-2), 171-187, ISSN 0030-770X, DOI: 10.1007/s1108501595939.
  44. Dudziak T., Łukaszewicz M., Simms N., Nicholls J.R., Steam oxidation of TP347HFG, super 304H and HR3C – analysis of significance of steam flowrate and specimen surface finish, Corrosion Engineering, Science and Technology, (2014), ISSN 1478-422X, doi:10.1179/1743278214Y.0000000222.
  45. Dudziak T., Łukaszewicz M., Simms N., Nicholls J.R., Steam oxidation of TP347HFG, super 304H and HR3C – analysis of significance of steam flowrate and specimen surface finish, Corrosion Engineering, Science and Technology, (2015), 50(4), 272-282.
  46. Dudziak T., Łukaszewicz M., Simms N.J., Nicholls J.R., Impact specimen geometry on T23 and TP347HFG steels behaviour during steam oxidation at harsh conditions, Corrosion Engineering, Science and Technology, (2016), ISSN 1743-2782, DOI: 1080/1478422X.2016.1185568.
  47. Dutkiewicz J., Rogal Ł., Bobrowski P., Szutkowska M., Leśniewski w., Dluzewski P., The effect of substitution of Wc by TiC in WC-Co composite tool materials on microstructure and mechanical properties, Chiang Mai Journal of Science, (2017), 44(4), 1714-1721, ISSN 0125-2526.
  48. Długosz P., Rączka A., Kopeć A., Krzyżak R., Darłak P., Hebda M., Properties of light MMCs modified with cordierite synthesized from fly ash, Journal of Materials Engineering and Performance, (2016), 25(6), 2261-2266, ISSN 1059-9495
  49. Egry I., Holland-Moritz D,. Novakovic R., Ricci E., Wunderlich R., Sobczak N., Thermophysical Properties of Liquid AlTi-Based Alloys, International Journal of Thermophysics (2010), 31(4–5), 949–965, ISSN 1572-9567.
  50. Fajkiel A., Dudek P., Reguła T., Lech-Grega M., Endomodification of Magnesium Alloys with Process Scrap. International Virtual Journal for Science, Technics and Innovations for the Industry, MACHINES, TECHNOLOGIES, MATERIALS (2012), 6(7), 80–83, ISSN 1313-0226.
  51. Fima P., Gazda A., Thermal Analysis of Selected Sn–Ag–Cu Alloys, Journal of Thermal Analysis and Calorimetry (2012), August 2012, ISSN 1388-6150 (print version), 1572-8943 (e).
  52. Fima P., Nowak R., Sobczak N., Effect of Metal Purity and Testing Procedure on Surface Tension Measurements of Liquid Tin, Journal of Materials Science (2010), 45(8), 2009–2014, ISSN 0022-2461.
  53. Fima P., Nowak R., Sobczak N., Effect of Metal Purity and Testing Procedure on Surface Tension Measurements of Liquid Ti, Journal of Materials Science, published on line 23 October, 2009, doi: 10.1007/s10853-009-3973-y.
  54. Fima P., Sobczak N., Thermophysical Properties of Ag and Ag-Cu Liquid Alloys at 1098 K to 1573 K, International Journal of Thermophysics (2010), 31(6), 1165–1174, ISSN 1572-9567.
  55. Garbacz-Klempka A., Czekaj E., Kozana J., Perek-Nowak M., Piękoś M., Influence of Al and Fe additions on structure and properties of Cu-Sn alloys, Key Engineering Materials, (2016), 682, 226-235, ISSN 1662-9795.
  56. Garbacz-Klempka A., Wołoszyn M., Dzieńkowski T., Kwak Z., Długosz P., Saja K., The technology transfer of nonferrous alloys casting during the middle age, Metalurgija, (2017), 56(1-2), 262-264, ISSN 0543-5846.
  57. Gazda A., Analysis of Decomposition Processo of Ausferrite in Copper-Nickel Austempered Ductile Iron, Journal of Thermal Analysis and Calorimetry (2010), 102(3), 923–930, ISSN 1572-8943.
  58. Gazda A., Determination of Thermal Effects Accompanying the Austempering of Copper-Nickel Ductile Iron, Thermochimica Acta (2010), 499(1–2), 144–148, ISSN 0040-6031.
  59. Gazda A., Warmuzek M., Analysis of thermal stability of ausferrite obtained by means of cyclic heat treatment of Cu–Ni (Mn, Mo) ADI, Thermochimica Acta, (2018), 663(10 May 2018), 58–66, ISSN 0040-6031.
  60. Gazda A., Warmuzek M., Bitka A. , Optimization of mechanical properties of complex, two-stage heat treatment of Cu–Ni (Mn, Mo) austempered ductile iron, Journal of Thermal Analysis and Calorimetry, (2018), 132(2), 813–822, ISSN 1388-6150.
  61. Gazda A., Żółkiewicz Z., Thermopysical Properties of Some Refractory Layers used in Lost Foam Technology, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170( 1), 355–363, ISSN 2222-8618.
  62. Godlewska E.M., Mars K., Drozd P., Tchórz A., Książek M., Reaction and diffusion phenomena in Ag-doped Mg2Si, Journal of Alloys and Compounds, (2016), 657, 755-764, ISSN 0925-8388
  63. Gordon B., Sobczak N., Warmuzek M., Gazda A., Boroń Ł., Purgert R.M., Sobczak J.J., Structural and Thermophysical Properties Characterization of Continuously Reinforced Cast Al Matrix Composite, China Foundry, 2010, 7(4), 456–462, ISSN 1672-6421.
  64. Gwiżdż A., Wierzchowski W., Grochal T., New Method of the in-situ Dezincification of Induction Furnace Charge Containing Galvanised Steel Sweet Scrap, Naučni Izvestiâ na Naučno-Tehničeskiâ S’ûz po Mašinostroene (2011), 19, 282–284, ISSN 1310-3946.
  65. Han J.H., Mattern N., Kaban I., Holland-Moritz D., Bednarĉik J., Nowak R., Sobczak N., Kim D.H., Eckert J., Phase Separation on Ternary Co–Gd–Ti Liquids, Journal of Physics: Condensed Matter. (2013), 25(24), 245104, doi:10.1088/0953-8984/25/24/245104.
  66. Homa M., Sobczak N., Sobczak J., Morgiel J., Seal S., Nowak R., Bruzda G., Wetting behaviour and reactivity between AlTi6 alloy and carbon nanotubes, Journal of Materials Engineering and Performance, (2016), 25(8), 3317-3329, ISSN 1059-9495.
  67. Homa M., Sobczak N., Sobczak J.J., Kudyba A., Bruzda G., Nowak R., Pietrzak K., Chmielewski M., Strupiński W., Interaction between graphene-coated SiC single crystal and liquid copper, Journal of Materials Engineering and Performance, (2018), 27(5), 2317-2329, ISSN 1059-9495.
  68. Izdebska-Szanda I., The Economical and Ecological Aspects of Using the Modified Water-Glass, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 364–370, ISSN 2222-8618.
  69. Izdebska-Szanda I., Baliński A., New Generation of Ecological Silicate Binders, Procedia Engineering (2011), 10, 887–893, ISSN 1877-7058.
  70. Kaban I., Köhler M., Ratke L., Nowak R., Sobczak N., Mattern N., Eckert J., Greer A.L., Sohn S.W., Kim D.H., Phase Separation in Monotectic Alloys as a Route for Liquid State Fabrication of Composite Materials, Journal of Materials Science (2012), 47(24), 8360–8366, ISSN 0022-2461.
  71. Kaban I., Nowak R., Bruzda G., Xi L., Sobczak N., Eckert J., Giebeler L., Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications, Carbon, (2016), 98(March), 702-707, ISSN 0008-6223.
  72. Kaban I., Nowak R., Shuleshova O., Korpała B., Bruzda G., Siewiorek A., Han J.H., Sobczak N., Mattern N., Eckert J., Sessile Drop Study of Gd–Ti Monotectic Alloys on Ceramic Substrates: Phase Transformations, Wetting, and Reactivity, Journal of Materials Science (2012), 47(24), 8381–8386, ISSN 0022-2461.
  73. Kalandyk B., Zapała R., Sobula S., Górny M., Boroń Ł., Characteristics of low nickel ferritic-austenitic corrosion resistant cast steel, Metalurgija/Metallurgy (2014), 53(4), 613-616, ISSN 0543-5846.
  74. Kicińska A., Kosa-Burda B., Kozub P., Utilization of a sewage sludge for rehabilitating the soils degraded by the metallurgical industry and a possible environmental risk involved, Human and Ecological Risk Assessment: An International Journal, (2018), 24(7), 1990-2010, ISSN 1080-7039.
  75. Klasik A., Pietrzak K., Makowska K., Sobczak J., Rudnik D., Wojciechowski A., Wear resistance of aluminium matrix composites reinforced with Al2O3 particle after multiple remelting, Journal of Materials Engineering and Performance, (2016), 25(8), 3084-3090, ISSN 1059-9495.
  76. Klasik A., Sobczak N., Pietrzak K., Makowska K., Wojciechowski A., Kudyba A., Sienicki E., Relationship between Mechanical Properties of Lead-Free Solders and their Heat Treatment Parameters, Journal of Materials Engineering and Performance (2012), 21(5), 620–628, ISSN 1059-9495.
  77. Kluska-Nawarecka S., Dobrowolski G., Nawarecki E., Industrial Applications of Multi-Agent Systems, Computer Methods in Materials Science (2011), 11(2), 271–278, ISSN 1641-8581.
  78. Kluska-Nawarecka S., Nawarecki E., Śnieżyński B., Wilk-Kołodziejczyk D., The recommendation system knowledge representation and reasoning procedures under uncertainty for metal casting, Metalurgija, (2015), 54(1), 263-266, ISSN 0543-5846.
  79. Kluska-Nawarecka S., Wilk-Kołodziejczyk D., Regulski K., Formalisms and Tools for Knowledge Integration Using Relational Databases, Transactions on Computational Collective Intelligence (2013), 12(8240), 1-20, ISSN 0302-9743.
  80. Kowalski A., Myszka D., Głownia K., Tezave Tankostenskih Ulitkov iż Bainitno Poboljsane Duktilne Litine, Livarski Vestnik (2010), 57(2), 70–82, ISSN 0024-5135.
  81. Kowalski A., Turzyński J., Kuder M., Računalniško podprta analiza zgradbe duktilne litine in bainitno poboljšane duktilne litine / Computer-Aided Analysis of the Structure of Spheroidal Graphite Cast Iron and ADI, Livarski vestnik (2011), 58(2), 70-86, ISSN 0024-5135.
  82. Książek M., Microstructure of AgNi and AgSnBi Powders Consolidated by CEC, Solid State Phenomena (2012), (186), 130–134, ISSN 1662-9779.
  83. Książek M., Boroń Ł., Radecka M., Richert M., Tchórz A., Mechanical and tribological properties of HVOF-sprayed (Cr3C2-NiCr+Ni) composite coating on ductile cast iron, Journal of Materials Engineering and Performance, (2016), 25(8), 3185-3193, ISSN 1059-9495.
  84. Książek M., Boroń Ł., Radecka M., Richert M., Tchórz A., The structure and bond strengh of composites carbide coating (WC-Co+Ni) deposited on ductile iron by thermal spraying, Journal of Materials Engineering and Performance, (2016), 502-509, ISSN 1059-9495
  85. Książek M., Boroń Ł., Richert M., Grzelka R., Structure, mechanical and tribological properties of HVOP sprayed (WC-Co+Al) composite coating on ductile cast iron, Journal of Coating Science and Technology, (2017), 4(2), 1-6, ISSN 2368-3355.
  86. Książek M., Mikułowski B., Richert M., Effect of Nb + Ti Coating on the Wetting Behavior, Interfacial Microstructure and Mechanical Properties of Al/Al2O3 Joints, Journal of Materials Science (2010), 45(8), 2194–2202, ISSN 0022-2461.
  87. Książek M., Richert M., Boroń Ł., Tchórz A., Characterization of Al2O3/Al/Al2O3 joints with Ti+Cr interlayer, International Journal of Materials Science, (2014), 3(5), 152-158, ISSN 2327-26354.
  88. Książek M., Richert M., Tchórz A., Boroń Ł., Effect of Ti, Nb and Ti+Nb Coatings on the Bond Strength-Structure Relationship, Journal of Materials Engineering and Performance (2012), 21(5), 690–695, ISSN 1059-9495.
  89. Książek M., Tchórz A., Boroń Ł., Mechanical Properties and the Microstructure of Al2O3/Al/Al2O3 Joints with the Surface Modification of Alumina by a Thin Layer of Ti + Nb, Journal of Materials Engineering and Performance, (2014), 23(5), 1635-1640, ISSN 1059-9495.
  90. Legien G., Śnieżyński B., Wilk-Kołodziejczyk D., Kluska-Nawarecka S., Nawarecki E., Jaśkowiec K., Agent-based decision support system for technology recommendation, Procedia Computer Science, (2017), 108C(2017), 897-906, ISSN 1877-0509
  91. Leśniewski W., Daskalov K., Wieliczko P., Darłak P., Drenchev L., Sobczak J., Use of Lorentz Force for Synthesis of Functionally Graded Materials, Journal of Materials Science and Technology (2010), 18(1), 3–20, ISSN 1005-0302.
  92. Leśniewski W., Wawrylak M., Wieliczko P., Boroń Ł., Krzak I., Porous titanium materials produced using the HIP method, Key Engineering Materials, (2016), 687, 149-154, ISSN 1662-9795
  93. Leśniewski W., Wieliczko P., Karwiński A., Wytrzymałość wielowarstwowych form ceramicznych badanych w procesie zginania w aspekcie wybranej metodyki badań, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 410–419, ISSN 2222-8618.
  94. Mattern N., Han J.H., Fabrichnaya O., Zinkevich M., Loser W., Werner J., Nowak R., Kaban I., Shuleshova O., Holland-Moritz D., Bednarcik J., Sobczak N., Eckert J., Experimental and Thermodynamic Assessment of the Gd-Ti System, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry (2013), 42, 19–26, doi: 10.1016/J.Calphad.2013.06.007, ISSN 0364-5916.
  95. Mattern N., Han J.H., Nowak R., Fabrichnaya O., Kaban I., Shuleshova O., Sobczak N., Experimental and thermodynamic assessment of the Gd-Ti-Zr phase diagram, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, (2019), 61, 237-245, ISSN 0364-5916..
  96. Morga M., Adamczyk Z., Jaszczółt K., Nattich-Rak M., Para G., Colloid Zirconia Binder of Improved Wetting Properties, Ceramics–Silikáty (2012), 56(1), 1–8, ISSN 0862-5468.
  97. Morga M., Para G., Adamczyk Z., Karwiński A., Improvement of Wetting Properties of Colloid Silica Binders, Industrial and Engineering Chemistry Research (2010), 49(18), 8532–8537, ISSN 1520-5045.
  98. Morgiel J., Sobczak N., Pomorska M., Nowak R., First stage of reaction of molten Al with MgO substrate, Materials Characterization, (2015), 103, 133-139, ISSN 1044-5803.
  99. Morgiel J., Sobczak N., Pomorska M., Radziwiłł W., Nowak R., Kudyba A., Wojewoda-Budka J., TEM Investigation of Reaction Zone Products Formed between Molten Al and CoO Monocrystalline Substrate, Journal of Microscopy (2010), 237(3), 299–303, ISSN 1365-2818.
  100. Mrozik A., Marczewska B., Bilski P., Książek M., OSL signal of IC chips from mobile phones for dose assessment in accidental dosimetry, Radiation Measurements, (2017),98, 1-9, ISSN 1350-4487
  101. Muolo M.L., Passerone A., Sobczak N., Valenza F., Overview on Wetting and Joining in Transition Metals Diborides, Advances in Science and Technology (2010), 64, 98–107, ISSN 1662-8969.
  102. Novakovic R., Giuranno D., Caccia M., Amore S., Nowak R., Sobczak N., Narciso J., Ricci E., Thermodynamic, surface and structural properties of liquid Co-Si alloys, Journal of Molecular Liquids, (2016), 221, 346-353, ISSN 0167-7322.
  103. Nowak R., Lanata T., Sobczak N., Ricci E., Giuranno D., Novakovic R., Holland-Moritz D., Egry I., Surface Tension of Gamma-TiAl-Based Alloys, Journal of Materials Science (2010), 45(8), 1993–2001, ISSN 0022-2461.
  104. Nowak R., Lanata T., Sobczak N., Ricci E., Giuranno D., Novakovic R., Holland-Moritz D., Egry I., Surface Tension of γ-TiAl Based Alloys, Journal of Materials Science, published on line 10 December, 2009, doi: 10.1007/s10853-009-4061-z.
  105. Nowak R., Lanata T., Sobczak N., Ricci E., Giurianno D., Novakovic R., Holland-Moritz D., Egry I., Surface Tension of Gamma-TiAl-Based Alloys, Journal of Materials Science (2010), 45(8), 1993–2001, ISSN 0022-2461.
  106. Nowak R., Sobczak N., Bruzda G., Wojewoda-Budka J., Lityńska-Dobrzyńska L., Homa M., Kaban I., Xi L., Jaworska L., Wettability and reactivity of ZrB2 substrates with liquid Al, Journal of Materials Engineering and Performance, (2016), 25(8), 3310-3316, ISSN 1059-9495.
  107. Nowak R., Sobczak N., Sienicki E., Morgiel J., Structural Characterization of Reaction Product Region in Al/MgO and Al/MgAl2O4 Systems, Solid State Phenomena (2011), 172–174, 1273-1278.
  108. Opaliński A., Nawarecki E., Kluska-Nawarecka S., Agent-based approach to WEB exploration process, Procedia Computer Science (2015), 51(1), 1052-1061, ISSN 1877-0509
  109. Passerone A., Muolo M.L., Valenza F., Sobczak N., Monteverde F., Wetting and Interfacial Phenomena in Ni-HfB2 Systems, Acta Materialia (2009), 57(2), 356–364, ISSN 1359-6454.
  110. Pezda J., Białobrzeski A., Use of sodium salt electrolysis of continuos modification of eutectic EN AC-AlSi12, Bulletin of Materials Science, (2015), 38(2), 373-377, ISSN 0250-4707
  111. Piekło J., Maj M., Żuczek R., Zachura A., Evaluation of Durability of Haulage System Based on Low Fatigue Cycle Test and FEM Analysis, Solid State Phenomena, (2015), 237, 227-232, ISSN 1662-9779.
  112. Pietrzak K., Sobczak N., Chmielewski M., Homa M., Gazda A., Zybała R., Strojny-Nędza A., Effects of carbon allotropic forms on microstructure and thermal properties of Cu-C composites produced by SPS, Journal of Materials Engineering and Performance, (2016), 25(8), 3077-3083, ISSN 1059-9495.
  113. Pirowski Z., Development of Cast Nickel Superalloys – A Way to Increase Efficiency of Power Generation Plants, Naučni Izvestiâ na Naučno-Tehničeskiâ S’ûz po Mašinostroene (2011), 19, 274–278, ISSN 1310-3946.
  114. Pirowski Z., Gwiżdż A., Kranc M., Testing ADI Properties when used for Cast Agricultural Tools Operating in Soil, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 371–377, ISSN 2222-8618.
  115. Pirowski Z., Gwiżdż A., Kranc M., Cast Agricultural Tools Operating in Soil, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 378–385, ISSN 2222-8618.
  116. Pirowski Z., Gwiżdż A., Kranc M., Performance Testing of Cast Agricultural Tools Operating in Soil, Naukovij Visnik Nacional’nogo Universitetu Bioresursiv i Prirodokoristuvannja Ukraini, Serija: Tekhnika ta energetika APK (2012), 170(1), 385–393, ISSN 2222-8618.
  117. Pirowski Z., Olszyński J., Gwiżdż A., Strain Hardening of Selected Iron Alloys Subjected to Cold Work, Naučni Izvestiâ na Naučno-Tehničeskiâ S’ûz po Mašinostroene (2011), 19, 285–288, ISSN 1310-3946.
  118. Ploetz S., Nowak R., Lohmueller A., Sobczak N., Singer R.F., Wettability of low weight borides by commercial aluminum alloys − A basis for metal matrix composite fabrication, Advanced Engineering Materials, (2016), 18(11), 1884-1888, ISSN 1438-1656.
  119. Polkowski W., Jóźwik P., Łyszkowski R., Bojar Z., Differential Speed Rolling of Ni3Al-Based Intermetallic Alloy − Electron Backscatter Diffraction and X-Ray Diffraction Study on Structure and Texture Evolution, Advanced Engineering Materials, (2017), 19(3), 1-7, ISSN 1527-2648.
  120. Polkowski W., Polkowska A., Zasada D., Characterization of high strength nickel thin sheets fabricated by di ff erential speed rolling method, Materials Characterization, (2017), 130, 173–180, ISSN 1044-5803.
  121. Polkowski W., Sobczak N., Nowak R., Kudyba A., Bruzda G., Polkowska A., Homa M., Turalska P., Tangstad M., Safarian J., Moosavi-Khoonsari E., Datas A., Wetting behavior and reactivity of molten silicon with h-BN substrate at ultrahigh temperatures up to 1750C, Journal of Materials Engineering and Performance, (2017), 26(1), 1-14, ISSN 1059-9495.
  122. Pysz S., Małysza M., The use of topology optimization in shaping the strength of castings, Solid State Phenomena, (223), 62-69, ISSN 1662-9779.
  123. Pysz S., Małysza M., Piekło J., The use of topolyogy optimization in shaping the strengh of castings, Solid State Phenomena, (2015), 223, 62-69, ISSN 1662-9779
  124. Pysz S., Żuczek R., The analysis of prototype cast constructions and the assessment of their technological and exploitation properties, Solid State Phenomena, (2015), 237, 215-220, ISSN 1662-9779.
  125. Pysz S., Żuczek R., Czekaj E., Karwiński A., Małysza M., Sprawka P., Integration of numerical procedures in the design and manufacturing technology on the example of a cast component for the automotive industry, Foundry Trade Journal International (2014), 188(3711), January/February, 26-29, ISSN 1758-9789.
  126. Regulski K., Kluska-Nawarecka S., Wilk-Kołodziejczyk D., Codification as part of knowledge management in research projects in the field of metallurgy, Applied Mechanics and Materials, (2015), 708, 288-293.
  127. Regulski K., Rojek G., Jaśkowiec K., Wilk-Kołodziejczyk D., Kluska-Nawarecka S., Computer-assisted methods of the design of new materials in the domain of copper alloy manufacturing, Key Engineering Materials, (2016), 682, 143-150, ISSN 1662-9795
  128. Ricci E., Amore S., Giuranno D., Novakovic R., Tuissi A., Sobczak N., Nowak R., Korpala B., Bruzda G., Surface tension and density of Si-Ge melts, The Journal of Chemical Physics, (2014), 140, 214704, doi: 10.1063/1.4879775, ISSN: 0021-9606.
  129. Ricci E., Giuranno D., Sobczak N., Further Development of Testing Procedures for High Temperature Surface Tension Measurements, Journal of Materials Engineering and Performance (2013) 22(11), 3381–3388, doi: 10.1007/S11665-013-0624-X.
  130. Rzadkosz S., Kranc M., Garbacz-Klempka A., Kozana J., Piękoś M., Refining processes in the copper casting technology, Metalurgija, (2015), 54(1), 259-262, ISSN 0543-5846
  131. Rzadkosz S., Zych J., Garbacz-Klempka A., Kranc M., Kozana J., Piękoś M., Kolczyk J., Jamrozowicz Ł., Stolarczyk T., Copper alloys in investment casting technology , Metalurgija, (2015), 54(1), ISSN 0543-5846
  132. Saja K., Białobrzeski A., Continuous Sodium Modification of Nearly-Eutectic Aluminium Alloys. International Virtual Journal for Science, Technics and Innovations for the Industry, MACHINES, TECHNOLOGIES, MATERIALS (2012), 6(12), 25–28, ISSN 1313-0226.
  133. Siewiorek A., Kudyba A., Sobczak N., Homa M., Huber Z., Adamek Z., Wojewoda-Budka J., Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy, Journal of Materials Engineering and Performance (2013), 22(8), 2247–2252, doi: 10.1007/S11665-013-0492-4, ISSN 1059-9495.
  134. Siewiorek A., Malczyk P., Sobczak N., Sobczak J.J., Czulak A., Kozera R., Gude M., Boczkowska A., Homa M., Effect of HNT on the microstructure, thermal and mechanical properties of Al/FACS-HNT composites produced by GPI, Journal of Materials Engineering and Performance, (2016), 25(8), 3194-3203, ISSN 1059-9495.
  135. Siewiorek A., Sobczak N., Sobczak J., Kudyba A., Kozera R., Boczkowska A., High-temperature interaction between molten AlSr10 alloy and glass-like carbon substrate, Journal of Materials Engineering and Performance, (2016), 25(8), 3348-3357, ISSN 1059-9495.
  136. Sniezynski B., Legien G., Wilk-Kołodziejczyk D., Kluska-Nawarecka S., Nawarecki E., Jaśkowiec K., Creative expert system: Result of inference and machine learning integration, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), (2016), 9827, 257-271, ISSN 0302-9743, DOI: 10.1007/9783319444031_ 16.
  137. Sobczak A., Kruczek P., Homa M., Kwinta P., A new microscopic insight into the thrombogenicity of umbilical catheters, Thrombosis Research, (2018), 168(August 2018), 80-82, doi:10.1016/j.thromres.2018.06.007.
  138. Sobczak J.J., Die Polnische Giessereiindustrie - Produktion und Kosten, Giesserei-Rundschau (2013), 60(5/6), 128-131.
  139. Sobczak J.J., Drenchev L., Metallic Functionally Graded Materials: A Specific Class of Advanced Composites, Journal of Materials Science & Technology (2013), 29(4), 297-316
  140. Sobczak J.J., Drenchev L., Asthana R., Nomograms for Rapid Assessment of Particle Sedimentation Behaviour in Liquid Phase Processing of Particle Reinforced Metal Composites, International Journal of Cast Metals Research (2013), 26(2), 122-128.
  141. Sobczak J.J., Drenchev L.B., Sobczak N., Asthana R., On Design of Metal-Matrix Composites Lighter than Air, Materials Science Forum (2013) 736, 55–71, ISSN 1662-9752.
  142. Sobczak N., Sobczak J., Asthana R., Purgert R., The Mystery of Molten Metal, China Foundry (2010), 7(4), 425–437, ISSN 1672-6421.
  143. Stachańczyk J., Pysz S., Wieliczko P., Ościłowski A., Ościłowski L., Filtriranje Jeklene Litine – Parametri in Ucinkovitost Postopka, Livarski Vestnik (2010), 57(1), 32–51, ISSN 0024-5135.
  144. Szewczyk-Nykiel A., Długosz P., Darłak P., Hebda M., Corrosion resistance of cordierite-modified light MMCs, Journal of Materials Engineering and Performance, (2017), 26 (6), 2555-2562, ISSN 1059-9495
  145. Turalska P., Homa M., Bruzda G., Sobczak N., Kaban I., Mattern N., Eckert J., Wetting behavior and reactivity between liquid Gd and ZrO2 substrate, Journal of Mining and Metallurgy, Section B: Metallurgy, (2017), 53(3), 285-293, ISSN 2217-7175.
  146. Ummethala R., Fritzsche M., Jaumann T., Balach J., Oswald S., Nowak R., Sobczak N., Kaban I., Rümmeli M.H., Giebeler L., Lightweight, free-standing 3D interconnected carbon nanotube foam as a flexible sulfur host for high performance lithium-sulfur battery cathodes, Energy Storage Materials, (2018), 10(January 2018), 206-215, ISSN 2405-8297.
  147. Valenza F., Nowak R., Sobczak N., Passerone A., Di Foggia M., Muolo M.L., Interactions Between Superalloys and Mould Materials for Investment Casting of Turbine Blades, Advances in Science and Technology (2010), 70, 130–135, ISSN 1662-8969.
  148. Voigt C., Ditscherlein L., Werzner E., Zienert T., Nowak R., Peuker U., Sobczak N., Aneziris C.G., Wettability of AlSi7Mg alloy on alumina, spinel, mullite and rutile and its influence on the aluminum melt filtration efficiency, Materials and Design, (2018), 150, 75-85, ISSN 0264-1275.
  149. Warmuzek M., Chemical composition of the Ni-containing intermetallic phases on the multicomponent Al alloys , Journal of Alloys and Compounds, (2014), 604(August 2014), 245-252, ISSN 0925-8388.
  150. Warmuzek M., Polkowska A., Chemical composition of chosen phase constituents in austempered ductile cast iron, Materials Testing, (2018), 60(7-8), 691-699, ISSN 0025-5300.
  151. Warmuzek M., Regulski K., A Procedure of in situ Identification of the Intermetallic AlTMSi Phase Precipitates in the Microstructure of the Aluminum Alloys, Practical Metallography (2011), 12, 660–684, ISSN 0032-678X.
  152. Wilczek A., Długosz P., Hebda M., Porosity characterization of aluminium castings by using particular non-destructive techniques, Journal of Nondestructive Evaluation, (2015), 34(3), 26, ISSN 0195-9298.
  153. Wilk-Kołodziejczyck D., Nawarecki E., Kluska-Nawarecka S., Jaśkowiec K., Pirowski Z., The conversion in the production of metallurgical assisted decision making system, Foundry Trade Journal International, (2017), 191(3743), 91-93, ISSN 0143-6902
  154. Wilk-Kołodziejczyk D., Mrzygłód B., Regulski K., Olejarczyk-Wożeńska I., Jaśkowiec K., Influence of process parameters on the properties of austempered ductile iron (ADI) examined with the use of data mining methods, Metallurgy, (2016), 55(4), 849-851, ISSN 0543-5846
  155. Wilk-Kołodziejczyk D., Opaliński A., Nawarecki E., Kluska-Nawarecka S., Exploration of WEB resources in the domain of metal processing technologies, Metallurgy, (2016), 55(1), 127-130, ISSN 0543-5846.
  156. Wilk-Kołodziejczyk D., Regulski K., Gumienny G., Comparative analysis of the properties of the nodular cast iron with carbides and the austempered ductile iron with use of the machine learning and the support vector machine, International Journal of Advanced Manufacturing Technology, (2016), 87(1), 1077-1093, ISSN 0268-3768.
  157. Wilk-Kołodziejczyk D., Regulski K., Gumienny G., Kacprzyk B., Kluska-Nawarecka S., Jaśkowiec K., Data mining tools in identifying the components of the microstructure of compacted graphite iron based on the content of alloying elements, The International Journal of Advanced Manufacturing Technology, (2017), 1-13, ISSN 0268-3768.
  158. Wilk-Kołodziejczyk D., Rojek G., Regulski K., Kluska-Nawarecka S., Adrian M., Mathematical formalism to represent knowledge concerning the production process of austempered ductile iron, Metallurgy, (2016), 55(1), 3-6, ISSN 0543-5846.
  159. Wojewoda-Budka J., Huber Z., Litynska-Dobrzynska L., Sobczak N., Zięba P., Microstructure and Chemistry of the SAC/ENIG Interconnections, Materials Chemistry and Physics (2013), 139(1), 276–280, ISSN 0254-0584.
  160. Wojewoda-Budka J., Sobczak N., Litynska-Dobrzynska L., Onderka B., Nowak R., TEM Characterization of the Reaction Products Formed in Al-Cu/SiO2 Couples due to High Temperature Interaction, Journal of Materials Science (2012), 47(24), 8464-8471, ISSN 0022-2461.
  161. Wojewoda-Budka J., Sobczak N., Morgiel J., Nowak R., Reactivity of Molten Aluminium with Polycrystalline ZnO Substrate, Journal of Materials Science (2010), 45(16), 4291–4298, ISSN 0022-2461.
  162. Wojewoda-Budka J., Sobczak N., Morgiel J., Nowak R., Microstructure Characteristics of the Reaction Product Region Formed due to the High Temperature Contact of Molten Aluminium and ZnO Single Crystal, Solid State Phenomena (2011), 172–174, 1267–1272.
  163. Wojewoda-Budka J., Sobczak N., Onderka B., Morgiel J., Nowak R., Interaction between Liquid Aluminum and Yttria Substrate: Microstructure Characterization and Thermodynamic Considerations, Journal of Materials Science (2010), 45(8), 2042–2050, ISSN 0022-2461
  164. Wojewoda-Budka J., Stan K., Nowak R., Sobczak N., High-temperature reactivity and wetting characteristics of Al/ZnO system related to the zinc oxide single crystal orientation, Journal of Materials Science, (2016), 51(4), 1692–1700, ISSN 0022-2461.
  165. Wojewoda-Budka J., Stan K., Onderka B., Nowak R., Sobczak N., Microstructure, chemistry and thermodynamics of Al/NiO couples obtained at 1273 K, Journal of Alloys and Compounds, (2014), 615(S1), S178–S182, ISSN 0925-8388.
  166. Wojewoda-Budka J., Zięba P., Morgiel J., Sobczak N., Nowak R., Application of Focus Ion Beam Technique for TEM Multilayer Materials Examination, Microscopy and Microanalysis (2010), 16 (Suppl. 2), 174–175, doi:10.1017/ S1431927610055911.
  167. Xi L., Kaban I., Nowak R., Bruzda G., Sobczak N., Eckert J., Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic, Journal of Materials Science, (2015), ISSN 0022-2461, doi: 10.1007/s10853-015-9538-3.
  168. Xi L., Kaban I., Nowak R., Bruzda G., Sobczak N., Eckert J., Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic, Journal of Materials Science, (2016), 51(4), 1779-1787, ISSN 0022-2461
  169. Xi L., Kaban I., Nowak R., Bruzda G., Sobczak N., Eckert J., Wetting, reactivity, and phase formation at interfaces between Ni-Al melts and TiB2 ultrahigh-temperature ceramic, Journal of the American Ceramic Society, (2017), 101(2), 911-918, ISSN 000-2-7820.
  170. Xi L., Kaban I., Nowak R., Bruzda G., Sobczak N., Stoica M., Eckert J., Investigation of Ni-B alloys for joining of TiB2 ultra-high-temperature ceramic, Journal of Materials Engineering and Performance, (2016), 25(8), 3204-3210, ISSN 1059-9495.
  171. Xi L., Kaban I., Nowak R., Korpała B., Bruzda G., Sobczak N., Mattern N., Eckert J., High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic, Journal of Materials Science, (2014), DOI: 10.1007/s10853-015-8814-6, ISSN 0022-2461.
  172. Xi L., Kaban I., Nowak R., Korpała B., Bruzda G., Sobczak N., Mattern N., Eckert J., High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic, Journal of Materials Science, (2015), 50(7), 2682–2690, DOI: 10.1007/s10853-015-8814-6, ISSN 0022-2461.
  173. Zachura A., Żuczek R., Innovative design of a longwall shearer’s haulage system with highly loaded components of tribological pair manufactured according to the precise casting technology, Solid State Phenomena, (2015), 223, 171-180, ISSN 1662-9779
  174. Żółkiewicz Z., The Lost Foam – Innovative Technology, Naučni Izvestiâ Na Naučno-Tehničeskiâ S’ûz Po Mašinostroene (2011), 19, 279–281, ISSN 1310-3946.
  175. Żuczek R., Pysz S., The innovative design of suspension cast components of vehicles made from high-strength AlZnMgCu alloy resistant to an IED type threat, Solid State Phenomena, SSP.223.181, 181-190, ISSN 1662-9779.
  176. Żuczek R., Pysz S., Sprawka P., Muszyński T., The innovative design of suspension cast components of vehicles made from high-strength AlZnMgCu alloy resistant to an IED type threat, Solid State Phenomena, (2015), 223, 181-190, ISSN 1662-9779
  177. Żuczek R., Zachura A., Innovative design of a longwall shearer’s haulage system with highly loaded components of a tribological pair manufactured according to the precise casting technology., Solid State Phenomena, SSP.223.171, 171-180, ISSN 1662-9779.